12
3
Stops playback
RED
Opens the option menu to select and deselect for deleting a recorded file(s).
This menu item opens only if you have selected first a file by using
pq
.
Marks a recording for deletion. When all recordings you want to delete are
marked, select
Deleted Selected
press
OK
. A message will appear to confirm
deleting. By pressing
OK
again the recordings will be permanently deleted
from your external USB storage device. Select
Cancel
if you don’t want to delete
them or select once more
OK
to definitely delete.
* This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed.
7.0 MAIn MEnu
The main menu gives you access to
Installation, Channels, Settings, Multimedia
and
Network
functions.
To access the main menu, press
MENU
in viewing mode. Throughout the main menu,
9
can be used
to get back to the previous screen and
to quit.
7.1 Installation of channels
Use
t
u
to select the main menu item
Installation
.
Use
pq
to highlight the submenu of choice and press
OK
to select. These submenus are available:
Manual Search
,
Auto Search
,
Information
,
Factory Settings
and
Freenet Menu
7.1.1 Manual Search
This menu allows you to search for channels at a specific Frequency or Channel number.
Use
pq
to select
Scan mode
, and select between
Free
which will only install Free-to-Air channels or
All
. This means that channels that are Free-to-Air or scrambled will be searched and stored.
Use
pq
to select
Channel No
and select the channel number of the frequency you’d like to search.
Press
OK
to open a list to make selection faster.
The next option
Modulation
is to select between
Only DVB-T
or
DVB-T+T2
modulation type.
When in doubt, use the
DVB-T+T2
setting.
If you use an active antenna (with built-in amplifier), then switch the
Antenna Power
to
On
. If you use a
passive antenna (without built-in amplifier), then select
Off
.
Highlight
Search
and press
OK
to start scanning. New found channels will be added to the channel list.
7.1.2 Auto Search
This menu allows you to search for channels from all available
Frequencies
or
Channel numbers
. Be
aware that all previous installed channels and favourite list(s) will be deleted. The new found channels
will be installed in the channel list and afterwards you can create a new favourite list if you like.
Select
Scan mode
, and select between
Free
which will only install Free-to-Air channels or
All
. Highlight
Search
and press
OK
to start scanning.
7.1.3 Information
This submenu shows receiver specific information such as hardware and software version. It also
displays technical information from the currently selected channel and signal strength and quality.
Please have the
Information
screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen.
