P4
YourreCeIver
3.
modeindicator
RED indicates that the receiver is in STANDBY mode.
GREEN indicates that the receiver is in OPERATING mode.
*THT505
2.3rearPanel
Fig. 2
1.
usb
Connector for USB storage devices.
2.
anTIn
To connect to your antenna for reception of broadcasted signals.
3.
anTouT
To connect the terrestrial antenna signal to your TV set. This
connection will allow you to watch digital terrestrial programmes
depending on the tuner of your TV and local broadcast conditions
4.
audiol/rConnector
To connect your receiver with your TV set using an RCA cable.*
5.
videoConnector
To connect your receiver with your TV set using an RCA cable.*
6.
s/PdIfCoaxial:
To connect your receiver to a digital home theatre, AV receiver or
digital audio amplifier.
7.
hdmI
To connect your receiver with your TV set using an HDMI cable.
8.
TvsCarT
To connect your receiver with your TV set using a SCART cable.
9.
audior/lout
To connect your receiver to an analogue audio amplifier.**
10.
PowerCord
Your receiver requires a supply voltage of 220~240 V AC
(Auto-selectable), 50/60Hz ±5%. Please ensure the local power
specification meets these requirements before connecting your
receiver to the wall outlet.
*THT505
**THT502
2.4remoteControl
Fig. 3
1.
q
Switches the receiver On/Standby
2.
Mutes all audio outputs of the receiver
3.
fav
Opens the favourite group selection
4.
lIsT
Opens the Record list
5.
audIo
Opens the audio language selection
6.
Back to previously watched channel
7.
Colourbuttons
For Multimedia and Teletext functions
8.
Opens the current channel information; 2x opens the current
event information and 3x the signal information
9.
ePg
Opens the EPG (Electronic Programme Guide) in TV mode
10.
pq
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
11.
tu
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific menus
12.
ok
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
13.
menu
Opens the main menu, in a menu you will get one step back
14.
Exits from the menu or sub-menu
15.
v+/v-
Increases/decreases the volume level
16.
P+/P-
Page up/down in all list modes
17.
Ch+/Ch-
Page up/down in all list modes
18.
0~9
Enters a channel number in viewing mode or a value inside the
respective menu
