P8
oPeraTIon
6.0oPeraTIon
Your new receiver is equipped with several features to make watching TV a true pleasure.
This paragraph describes these features. Please also read chapter
7.0
to get familiar with
the menu of your receiver.
6.1Changingchannels
Following ways are possible for changing channels with your new receiver:
Via direct access using the
0~9
buttons.
Via the channel list through
ok
and the
Ch+/Ch-
buttons.
Via the
pq
buttons.
6.1.1directaccessvia0~9buttons
To gain direct access to a certain channel, simply input its number with the
0~9
buttons on
the remote control. Channel numbers can be up to four digits long. Entering a number with
less than four digits is possible. Just wait a few seconds and your receiver will switch to the
selected channel or press
ok
immediately after selecting the channel number.
6.1.2Channellist
Press
ok
in viewing mode to display the
Channel List
. Use
pq
in the channel list to
highlight your channel of choice and press
ok
once to select the highlighted channel. Press
ok
again to leave the channel list mode. Inside the channel list it is possible to use the
Ch+/
Ch-
buttons as well in order to scroll page-wise through the list.
TIP:
Use
tu
to toggle between the
All Channel
list and favourite list(s)
or press
fav
in viewing mode for a list of available favourite lists.
6.1.3usingthe
pq
buttons
p
switches to the next channel.
q
switches to the previous channel.
6.2Infobanner
While watching TV you can press the button at any time to access current information
about the channel and event*. Press twice for extended EPG details about the current
channel. Press three times for technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.
6.3selectionofaudiolanguage
Some channels support a choice of audio formats and/or languages. To select another
audio stream, press
audIo
in viewing mode. A list with available audio streams will now be
displayed. Use
pq
to select the desired stream and confirm with
ok
. The audio channel as
stereo, mono, left and right can be selected with the
tu
buttons.
6.4Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TeXT
button
in viewing mode and use the
0~9
buttons to input the number of the page you wish to see.
The coloured buttons of the remote control allow you to jump to selected pages directly,
as indicated on the bottom of the Teletext screen. Use the
pq
buttons to select one
