P6
baSIc connecTIonS
12.
alTGr +
Select starting page
13.
For usage, see instructions on display
14.
alTGr +
Select your favourite web sites and add bookmarks
15.
alTGr +
Activate the cursor function
16. Battery compartment
noTe:
Buttons in
Yellow
require use of
alTGr
button to operate, buttons in
blUe
require the
alT
button.
2.6 Using the mouse cursor
Fig. 8
1. Make sure the keyboard side is unlocked by pressing the unlock button
.
2. Press
alTGr
and
button to activate/deactivate the mouse cursor.
3. Use the
t
u
p
q
to move the mouse cursor over the screen.
4. Press
alT
+
button to click on links or buttons on the web page.
noTe:
The mouse cursor will disappear from the screen if the mouse is idle for over 10 seconds. Press
any of the
p
q
t
u
buttons to re-display the mouse cursor on the screen.
2.7 Using the remote control
To use the remote control, point it towards the front of the digital receiver. The remote control has a range
of up to 5 metres from the receiver, if properly aligned towards the IR eye on the front panel.
Fig. 9
noTe:
The remote control will not operate if its path is blocked or affected by bright/stroboscopic light.
2.8 Using the keyboard
To use the keyboard, point it towards the front of the receiver and type in your letters, just like using a PC
keyboard.
3.0 baSIc connecTIonS
Fig. 10
This section explains the most important functions to ensure that you can directly watch television with
your new receiver. Please note, additional adjustments may be required.
noTe:
Do not connect the receiver to the main power yet.
3.1 connecting the antenna and lnb (low noise block) to the receiver
Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality
coaxial cable and suitable ‘F-connector’ plugs. You may use the SAT OUT connector to connect to a
second receiver.
3.1.1 connection of multiple fixed antennas via DiSeqc 1.0/1.1
Fig. 11
•
Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0/1.1 switch using a good
quality coaxial cable and suitable ‘F-connectors’.
•
Connect the output or “to receiver” of the DiSEqC 1.0/1.1 switch to the SAT IN connector on your receiver.
•
Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.