THOMSON SpeedTouch 716, Руководство пользователя

Страница: 69 / 110

Chapter 5
SpeedTouch™ Web Interface
E-DOC-CTC-20041126-0014 v3.0
67
5.6.1 Basic
The Basic page
Following figure shows you the Wireless Basic Settings page:
Configuring the
SpeedTouch™ Access
Point
If the Enable Wireless Network check box is selected, following fields are available:
Hide Wireless Network:
Select this check box to prevent the SpeedTouch™ from broadcasting it’s
SSID.
Wireless Network Name (SSID):
The network name of your wireless network.
Channel:
The frequency in which the radio links are about to be established. Select one
channel that you want from the drop-down list.
Transmission Mode:
Following modes are available:
802.11b only
802.11g only
Mixed Mode
Click this mode to allow both IEEE802.11b and IEEE802.11g clients.
Transmission Rate:
This list allows you to configure the transmission rate of your wireless
connection.
Turbo Mode:
Check Enabled to invoke this function for speeding up the transmission, or
check Disabled to close this function.
For more information, see “2.4.7 Hiding your Wireless Network” on
page 34 .
For more information on the use of radio channels, see “ Radio
channels” on page 19 .
!
Take into consideration that if the distance between the SpeedTouch™
and the wireless client increases, the throughput for this wireless
client decreases.
!
If Mixed Mode is selected in the Transmission Mode list, you can not
manually specify a transmission rate.