THOMSON SpeedTouch 716, Руководство пользователя

Страница: 81 / 110

Chapter 6
Voice over IP
E-DOC-CTC-20041126-0014 v3.0
79
6.1.1 Configuration
Hardware installation
Use a phone cable to:
1
Wire the SpeedTouch™ Phone port(s) to your phone(s).
2
Wire the SpeedTouch™ PSTN port to your telephone wall outlet or distributed
filter depending on your Service Provider’s specific needs.
Basic SIP configuration
Proceed as follows:
1
Open the SpeedTouch™ web pages.
2
Browse to Voice > SIP Basic
3
The SIP Basic Settings page appears.
4
If the SIP proxy and registrar are located:
On your local network, click Primary LAN .
On the WAN, click the interface name of your WAN connection.
5
Under SIP Registrar Address , enter the IP address or domain name of your SIP
registrar server.
6
Under SIP Outbound Proxy , enter the IP address or domain name of your SIP
proxy server.
7
Under Registration Information , enter the registration information provided
by your SIP registrar.
8
Click Apply .
9
If you are:
Not using the PSTN port, no additional configuration is needed.
Using the PSTN port, continue with “ PSTN Configuration” on page 80 .
This step is only required if you still want to make phone calls using
the PSTN.
For more information, see “5.1 Accessing the SpeedTouch™ Web
Pages” on page 44 .