THOMSON SpeedTouch 605, Руководство пользователя

Страница: 25 / 212

Chapter 1
Your SpeedTouch™
E-DOC-CTC-20050429-0104 v1.0
15
1.3.3 Access via FTP
File Transfer Protocol
(FTP)
You can access the file system of the SpeedTouch™ via the File Transfer Protocol
(FTP), in order to:
Restore or backup configuration files, templates or language packs.
Upgrade your configuration or firmware.
File system
The SpeedTouch™ file system is stored on nonvolatile memory, and contains the
SpeedTouch™ software, service template files and (optionally) default setting files.
FTP session
To open an FTP session:
1
Open a
Command Prompt
window.
2
At the prompt, type
ftp
followed by the IP address of your SpeedTouch™
(default is 192.168.1.254).
3
Enter your SpeedTouch™ security user name and password.
4
The example below shows an FTP session to the SpeedTouch™ file system:
File system structure
The structure of the file system is very simple: It consists of a single root directory
called
root
and two subdirectories called
active
and
dl
.
The
root
directory contains:
all the necessary files for the SpeedTouch™ to boot correctly
the active and the dl directories
The
active
directory contains the active software image.
The
dl
(download) directory contains the passive software image.
In Windows XP for instance:
1
On the Windows task bar, click
Start.
2
Select (
All) Programs > Accessories > Command Prompt
.
The default user is ‘Administrator’ and the default password is blank.
If you made changes to the SpeedTouch™ configuration and saved
them, a user.ini configuration settings file is created in the
dl
subdirectory.