THOMSON SpeedTouch 605 Скачать руководство пользователя страница 193 | Manualshive

Страница: 193 / 212

THOMSON SpeedTouch 605 Скачать руководство пользователя страница 193

Chapter 7

Software Upgrade

E-DOC-CTC-20050429-0104 v1.0

183

7 Software Upgrade

Introduction

This chapter describes how to upgrade the SpeedTouch™ system software or
firmware.

System software

upgrades availability

For the availability of new system software version packages you can:

Click the

SpeedTouch Maintenance

link, available on the Setup CD menu.

Go to the embedded Update page.

Check for SpeedTouch™ upgrades at

http://www.speedtouch.com/upgrade.

System software

packages and security

All system software packages for the SpeedTouch™ are digitally signed and
encrypted. Packages that may have become corrupted, or been altered in any way,
will not be accepted by the SpeedTouch™.
This way the SpeedTouch™ or its service can never be corrupted or lost.

System software

upgrades

Depending on the Operating System your computer is running, you can upgrade your
SpeedTouch™ via:

The SpeedTouch™ Update page (all Operating Systems); see

“7.1 Embedded

Update Page” on page 184

for more information.

The SpeedTouch™ Upgrade Wizard (Microsoft Windows or Mac OS X); see

“7.2 Upgrade Wizard on Setup CD” on page 186

for more information.

The SpeedTouch™ BootP client (all Operating Systems); see

“7.3 Upgrade via a

BOOTP/TFTP Server” on page 189

for more information.

Preliminary steps

Before you start with upgrading the SpeedTouch™, always make sure:

To inform all people relying on the SpeedTouch™ services, that service may be
down for some short period.

The new system software file is stored on your local disk or another storage
device.

!

It is NOT possible to upgrade your SpeedTouch™ over a wireless connection.

«
...
191
192
193
194
195
...
»

Содержание SpeedTouch 605





















































































































































































































Отзывы:

Нет отзывов