THOMSON SpeedTouch 605, Руководство пользователя

Страница: 139 / 212

Chapter 5
Expert Configuration
E-DOC-CTC-20050429-0104 v1.0
129
5.3.4 IP Routing
Overview
The
IP Routing
table presents the current content of the SpeedTouch™ Routing
Information Base. It contains all routes to all possible destinations and is consulted by
the SpeedTouch™ any time prior to sending or forwarding any packets.
Similar to the IP address table, a number of IP Routes are pre-configured. Other
routes are either added via adding an IP address manually, or via the address
negotiation of a Packet Service connection session, e.g. for
Routed PPPoA 's or
Routed PPPoE 's IPCP, via the DHCP client, e.g. for Routed Ethernet (MER), via pre-
configuration, for example for Routed IPoA, or by the Routing Information Protocol.
Adding an IP route
To add an IP route:
1
Click
New
in the bottom row of the table
2
Specify the
Destination
IP prefix
3
If needed, select a packet-classification routing
Label
(in case the route applies
for classified packets)
4
Either specify the IP address of a directly connected
Gateway
OR select the
Interface
to which the route should apply (mutually exclusive).
5
Click
Apply
.
Deleting an IP route
To delete an IP route:
1
Select the IP route you want to delete
2
Click
Delete
.
An IP prefix is the combination of an IP address and (sub)net mask and e.g.
192.6.11.150/24.