THOMSON SpeedTouch 576, Руководство пользователя

Страница: 86 / 126

Chapter 4
SpeedTouch™ Web Interface
E-DOC-CTC-20050429-0103 v1.0
78
4.5.9 New Content Level
Introduction
This page allows you to create a new content level. To access this page:
1
On the
Toolbox
menu, click
Web Site Filtering
.
2
In the upper right corner, click
Configure
.
3
Under
Pick a task...
, click
Create a new content level
.
Procedure
To apply a new content level following actions must be performed:
1
Content level creation
2
Content level configuration
3
Content level definition
4
Content level activation
Content level creation
Proceed as follows:
1
In the
Name
box, type a name for the new content level.
2
In the
Description
box, type a short text to describe what this security level will
do.
3
Click
Next
.
Content level
configuration
Proceed as follows:
1
The Configuration section becomes available.
2
Click:
Clone Existing Level
to start from a previously created content level.
Black List
to allow all web sites by default.
White List
to block all web sites by default.
3
Click
Next
.
Content level definition
Only web sites that match the selected content level will be allowed. Proceed as
follows:
1
If you want to:
Allow a category:
Select the check box next to the category name.
Allow an entire group:
Select the check box next to the group name.
Block a category:
Clear the check box next to the category name.
Block an entire group:
Clear the check box next to the group name.
2
Click
Apply
.
! You can create up to 16 content levels.
If no levels have been defined before, this option will not be
shown.