THOMSON SpeedTouch 576, Руководство пользователя

Страница: 120 / 126

Chapter 6
Troubleshooting
E-DOC-CTC-20050429-0103 v1.0
112
Upgrade via Setup CD
If the Upgrade Wizard in step 4 , as described in “ Upgrade procedure” on page 105 ,
does not find any SpeedTouch™ on the network, an error window will appear, stating
your SpeedTouch™ has not been found.
In this case check that:
The SpeedTouch™ is turned on and fully initialised.
Your PC is correctly connected to the SpeedTouch™.
Your PC has a valid IP address. To check this in MS Windows:
1
In the Windows task bar, click
Start
.
2
Select
Run...
3
Type
cmd
in the
Open
field.
4
Click
OK
. A black window will appear with a flashing cursor.
5
Type
ipconfig
and then press Enter.
6
Verify that your computer has a valid IP address, that is any address but
0.0.0.0.
No dedicated firewall device or router is placed between your PC and the
SpeedTouch™.
No personal firewall software is running on your PC.
To repeat the search for your SpeedTouch™, click
Back
or restart the wizard. As soon
as the wizard finds your SpeedTouch™, you can continue with the Upgrade Wizard.