21
Starting the Dishwasher
1.
Turn the water tap on.
2.
Open the dishwasher door.
3.
Check the filters.
Ensure they are clean and properly positioned. See
section.
4.
Check that there is rinse aid and salt.
5.
Load the dishes.
Ensure that the spray arms can rotate freely.
6.
7.
Press
to switch on the dishwasher.
8.
Select the desired washing programme by pressing the corresponding programme
button.
The corresponding programme indicator light will illuminate.
Delay timer:
The delay timer allows you to delay the start of a washing programme
from 1 hour to a maximum of 24 hours.
Repeatedly press
+
/
-
until the desired start delay time is shown on the display,
e.g. H:03 for a 3-hour delay.
Once the delay timer has been set, close the door
to activate the function.
To cancel the delayed start,
+
/
-
until the display shows H:00
9.
If you want to use one of the three functions, follow the steps below:
Using the extra drying function
Press
to activate this function and the indicator light
will
illuminate.
This function can only be used with the Intensive, Normal, Eco and Glass
When this function is activated, the dishwasher will increase temperature at the
end of a washing programme to improve drying.
press
Downloaded from www.vandenborre.be
