manualshive.com logo in svg

THOMSON Grass Valley KAM-XM Series, Инструкция по эксплуатации

Поделиться
Скачать
THOMSON Grass Valley KAM-XM Series Скачать руководство пользователя страница 17

KAM-XM-SERIES Instruction Manual

17

Installation

 

KAM-XM-UPC

For a KAM-XM-UPC HDTV Up Converter, connect the SD signal to be up 
converted to the IN (J2) BNC. Loop the signal from the LOOP (J1) BNC to 
another destination if required.

Connect the OUT1 (J5) and OUT2 (J4) BNCs to the HDTV device.

KAM-XM-UDC

For a KAM-XM-UDC HDTV Up/Down Converter, connect the SD signal 
to be up converted or the HD signal to be down converted to the IN (J2) 
BNC. Loop the signal from the LOOP (J1) BNC to another destination if 
required.

Connect the OUT1 (J5) and OUT2 (J4) BNCs to the HDTV device if up con-
verting or the SDTV device if down converting. 

KAM-XM-UNC

For a KAM-XM-UNC HDTV Up Converter with advanced SDTV noise 
reduction, connect the SD signal to be up converted to the IN (J2) BNC. 
Loop the signal from the LOOP (J1) BNC to another destination if required.

Connect the OUT1 (J5) and OUT2 (J4) BNCs to the HDTV device. 

KAM-XM-DNC

For a KAM-XM-DNC Down Converter, connect the HDTV signal to be 
down converted to the IN (J2) BNC. Loop the signal from the LOOP (J1) 
BNC to another destination if required.

Connect the OUT1 (J5) and OUT2 (J4) BNCs to the SDTV device. 

Содержание Grass Valley KAM-XM Series

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды