THOMSON Grass Valley KAM-XM Series Скачать руководство пользователя страница 16

Страница: 16 / 80

KAM-XM-SERIES Instruction Manual

Installation

Cabling

All cabling to the KAM-XM module set is done on the corresponding Dual
Height KAM-XM-R rear module (XM-IO-1) at the back of the 2000 frame.

KAM-XM-R Rear Module Connections

Refer to

Figure 7

for an illustration of the KAM-XM rear module.

The KAM-XM rear module provides the following input and output and
control connections.

•

IN (BNC)– a serial digital input that may be either standard definition
(SD) or high definition (HD) video depending on the front module
type.

•

LOOP (BNC)– provides an output for the input signal to be looped to
another destination.

•

OUT1 (BNC)– this serial digital output connection can be either SD or
HD depending on the front module type and the output format
selected.

•

OUT2 (BNC)– this serial digital output connection can be either SD or
HD depending on the front module type and the output format
selected.

•

RS-232 Port (DB-9, Male) – this serial port allows a direct interface to the
module for testing and configuration purposes. This port is not nor-
mally used.

•

GPI0 Port (DB-9, Female) – this port allows connection of external GPI
(General Purpose Interface) signals to the module as described in

GPI0

Connections for GPI Control

on page 18

Figure 7. KAM-XM Rear Module Input/Output Connectors

LOOP

OUT2

OUT1

RS-232

XM-IO-1

GPI0

8330_02

Содержание Grass Valley KAM-XM Series

















































































Результаты поиска

Содержание Grass Valley KAM-XM Series

Отзывы:

Бренды по названию

Популярные бренды

THOMSON Grass Valley KAM-XM Series, Инструкция по эксплуатации

Результаты поиска

Содержание Grass Valley KAM-XM Series

Отзывы:

Бренды по названию

Популярные бренды