THOMSON Grass Valley Kalypso Classic, Справочное руководство

Страница: 125 / 404

Kalypso Reference Manual 125
4-M/E Main Panel
Effects Run Subpanel
The Effects Run subpanel primary function is to control the running of
multiple keyframe effects. Also located on this subpanel is the
Hold Inputs
button used to control E-MEM source changes ( Figure 73 ).
Figure 73. Effects Run Subpanel
Hold Inputs Button
The
Hold Inputs
button can be used to control whether E-MEM recalls will
change any of the current source selections on any Kalypso system bus
(including the Aux buses). When on, no source on any bus will change
when an E-MEM is recalled. When off, sources may change during an
E-MEM recall (if no other types of hold are in force).
Note Different types of control are available for choosing which sources are
subject to change during a Recall: Source Override (
page 68 ) Bus Hold
( page 70 ), Hold Inputs ( page 125 ), and Source Hold ( page 271 ).
0618_02_64_r1
Effects Run
Stop Stop
Next
Next
Lever Lever
Enabl
Enabl
Rev Rev
Hold Hold
Inputs
Inputs
Rew Rew
Run Run
Effects Run
Subpanel
Hold Inputs
Button
Run
Lever Arm
Run Lever Arm
Progress Bar
Run Control
Buttons