65
EN
EN
Menus
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select
On
to enable this function.
Note: the
Eco
function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
same channels to the same numbers during installation of channels (page 6).
Note: this function is positioned by default on
On
.
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select
RGB
(DTH 8045),
S-Video
or
CVBS
. If you do not know the type of signal
supplied by the connected device, try each of the settings to obtain the best
result.
Note: format of image signals:
DTH 8045 - RGB:
English signal colour code (Red – Green – Blue). This is best
quality.
S-Video:
S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
CVBS:
composite video signals. This is poor quality.
Scart connector
2_DTH8045E_en.qxd 12/04/05 10:22 Page 65
