Connections and initial set up
4
About your device
Your DTH 8005 is a digital video player and recorder.Thanks to its tuner you can watch and
record TV progammes on DVD+R and DVD+RW discs. It can play the majority of 8 cm and 12
cm discs, with the exception of DVD Rom, DVD Ram, and DVD audio.
Placing the DTH 8005 in service
Using the remote control unit correctly
When you use remote control, point the unit at the appliance you want to control (DTH 8005,
TV set or satellite receiver). Ensure that there is no obstacle between the remote control unit
and the appliance, otherwise the infrared signal carrying the remote control commands will be
blocked.To control your DTH 8005, ensure that the remote control unit is in DVD mode by
pressing once on the DVD key before using any other keys.
Switch on your DTH 8005 and your TV set
1.
Turn on your TV set.
2.
Set your DTH 8005 remote control unit in DVD
mode by pressing once on the
DVD
key.
3.
Switch on your DTH 8005 by pressing the
STANDBY/ON
button on the front panel of the
player.
4.
The first time you turn on your DTH 8005, it will ask
you to select a preferred language for the various
displays via the menu which appears on your TV
screen. If this menu is not displayed, on your TV
screen select the AV socket to which you connected
your DTH 8005.
Note: The player menus as well as the dialogues and subtitles
of the DVDs will always be presented in the language you’ve
chosen if it is available on the discs played.
5.
Choose a language using the
,
keys on the
remote control unit, then confirm by pressing
OK
.
Note: Note: the
buttons.
Continue on the next page …
2_DTH8005_en 9/03/04 17:19 Page 4