- EN 6 -
Search within a track
1.
During play, press and hold
/
.
2. Release to resume normal play.
Listening to the radio
You can program a maximum of 20 preset radio stations (FM).
1.
Press the
SOURCE
button to select RADIO mode. The unit will be in FM radio mode.
2. Press
/
to search for a radio station.
3.
Select the desired radio station by pressing the
/
button.
4.
Once you find a station you want to save, press the
MEM
button on the remote control, ”P01” will
be shown on the display, press
MEM+/MEM-
until the desired memory position number appears on
the display. Press the
MEM
button again to confirm and save the current station.
5.
(Auto) Press and hold the
MEM
button. The unit will automatically start and search the frequencies.
All available stations are programmed in the order of waveband reception strength; the first
programmed radio station is broadcast automatically.
ATTENTION: For optimal reception, fully extend and adjust the position of the antenna
Play from external audio
You can play from an external audio device such as an MP3 player through this unit.
Line in jack
(Requires a 3.5mm cable)
1.
Connect a 3.5mm cable to the Line in jack on the top panel. Connect the other end of the 3.5mm
cable to an Mp3 player or other audio device.
2.
Press the button to turn the unit on.
3.
Press the
SOURCE
button to switch to Line In mode.
4.
Use the controls on the connected device to begin playing audio routed through the unit.
Auxiliary Input RCA
(Requires an RCA cable)
1.
Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the audio
output on your DVD player, stereo system, gaming system or television.
2.
Press the power button to turn the unit on.
3.
Press the
SOURCE
button to switch to Aux In mode.
4.
Use the controls on the connected device to begin playing audio routed through the unit.
Using the USB/SD input
1.
Plug your USB flash drive or SD card to the USB socket or SD slot.
2.
Press the
SOURCE
button to select USB or SD mode; the unit will play automatically. If not, press
.
3.
Press the
/
to select a track.
4. Press
VOL+/VOL –
to adjust the volume.
Remarks:
*Sensitive equipment near the
USB/SD port may be affected when it is in use. The signal may be
affected.
USB charging
There is a USB charger on the top of the unit to charge small devices such as smartphones that can
be charged via USB.
Output power: 5V/1A max
Wireless charging
There is an induction on the top of the unit to charge small devices such as smartphones.
Please put the smartphones on the “ " center, the smartphone will automatically start charging. If not,
please adjust the smartphone location.
* Your phone must be compatible with wireless chargers or Qi technology.
