THOMSON DCW725, Руководство пользователя

Страница: 23 / 29

Chapter 3: Software Installation and Configuration
Type the encryption key length and fill out WEP
keys. The system allows you to type in 4 kinds of the
WEP key. For
64-bit WEP mode, the number you
can type is that 5 characters or 10 hexadecimal digits.
As for
128-bit WEP mode, the number you can type
is that 13 characters or 26 hexadecimal digits.
Current Network Key:
Select one of network key (from 1 to 4) that you set
on the Key boxes as default one.
13
S S e e c c u u r r i i t t y y – – 8 8 0 0 2 2 . . 1 1 X X
For the 802.1x network Authentication, the settings
that you can adjust including RADIUS Server,
RADIUS Port, and RADIUS Key.
RADIUS Server: RADIUS Server is a protocol for
carrying authentication, authorization, and
configuration information between a Network Access
Server which desires to authenticate its links and a
shared Authentication Server. Please type in the IP
Address for the RADIUS Server.
RADIUS Port: Except for the IP address of the
RADIUS Server, you have to enter the port number
for the server. Port 1812 is the reserved
RADIUS-authentication port described in RFC 2138.
Earlier AP (RADIUS clients) use port 1945. The
default value will be shown on this box. You can
keep and use it.
RADIUS Key: A RADIUS Key is like a password,
which is used between IAS and the specific RADIUS
client to verify identity. Both IAS and the RADIUS
client must be use the same RADIUS Key for
successful communication to occur. Type in the
words for the RADIUS Key.
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
-
-
W
W
P
P
A
A
For the WPA network Authentication, the settings
that you can adjust including WPA Group Rekey
Interval, RADIUS Server, RADIUS Port, RADIUS
Key and Data Encryption.
WPA Group Rekey Interval : Type in the time for
the WAP group rekey interval. The unit is second.
RADIUS Server: RADIUS Server is a protocol for
carrying authentication, authorization, and
configuration information between a Network Access
Server which desires to authenticate its links and a
shared Authentication Server. Please type in the IP
Address for the RADIUS Server.
RADIUS Port: Except for the IP address of the
RADIUS Server, you have to enter the port number
for the server. Port 1812 is the reserved
RADIUS-authentication port described in RFC 2138.
Earlier RADIUS clients use port 1945. The default
value will be shown on this box. You can keep and
use it.
RADIUS Key: A RADIUS Key is like a password,
which is used between IAS and the specific RADIUS
client to verify identity. Both IAS and the RADIUS
client must be use the same RADIUS Key for