THOMSON DCW725, Руководство пользователя

Страница: 25 / 29

Chapter 3: Software Installation and Configuration
15
A A d d v v a a n n c c e e d d
The Advanced wireless setting allows you to
configure the data rates and WiFi thresholds.
Basic Rates:
Choose Minimal or All as the basic rates.
Supported Rates:
Choose Minimal or All as the supported rates.
Beacon Interval:
Set the period of beacon transmissions to allow
mobile stations to locate and identify a BSS. The
measure unit is “time units”(TU) of 1024
microseconds.
DTIM Interval:
The value you set here are used to inform mobile
stations when multicast frames that have been
buffered at the router will be delivered and how often
that delivery will happen.
Fragmentation Threshold:
Set the number of the fragmenting frames to make
the data be delivered without errors induced by the
interference.
Frames longer than the value you set here are
fragmented prior to the initial transmission into
fragments no longer than the value of the threshold.
RTS Threshold:
Set the value for sending a request to the destination.
All the frames of a length greater than the threshold
that you set here will be sent with the four-way frame
exchange. And, a length less than or equal to the
value that you set will not be preceeded by RTS.
54g Mode:
There are five wireless modes for you to choose,
please check the specification of your wireless card
and choose a proper setting.
54g Protection:
Select Off to have none protection; select Auto to
open the 54g protection.
Xpress Technology:
Click Enabled to enable this function; click Disabled
to close this function.
Rate:
It decides the speed of data transmission. There are
several rates provided here for you to choose. Choose
any one of it by using the drop-down menu.
Output Power:
This setting decides the output power of this device.