THOMSON 512375, Руководство пользователя

Страница: 39 / 168

720P HD WiFi iP camera
15
en
d - CONFigurATiON ANd uSE
To program an alert to be sent when motion is
detected, you need 2 email addresses: the address
of the sender which will be used by the camera,
and the address which will receive the alerts. The
camera uses the username and password of the
sender address to connect and send the email.
Configuration depends on the chosen email
provider's settings.
Note: the 2 email addresses can be the same (you
will simply be sending an email to yourself)
In our example, we use www.gmail.com :
sender-address@gmail.com sends the alerts,
recipient@gmail.com receives the alerts. Both
addresses need to have been created beforehand.
To program email alerts for motion detection, right
click on a camera in the list at the top right of the
main screen or on the screen image, then select
"
Camera settings ". Then go to " Network ",
"
Message settings
":
1 2 3 4 5 6
7 8 9
1
Tick the " Enable " box to enable email sending
2
SMTP server : varies with the email provider of
the address sending the alert. In our example,
using Gmail, smtp.gmail.com
3
SMTP port : varies with the email provider of
the address sending the alert. I our example
using Gmail, 465
4
Security : security when connected to the
email provider. In our example using Gmail,
TLS
5
Authentication : indicates whether
connection is compulsory (authentication) to
send an email. In our example using gmail: Yes
(in other words: you cannot send an email via
Gmail if you are not logged into your account).
6
SMTP user name : Name that you have to
enter to log into the email box which will send
the alerts. In our example using Gmail, this
is the sender address: sender-address@
gmail.com
7
SMTP password : The password used to log
in to sender-address@gmail.com, in our
example
8
Sender : Enter the new address used to send
the alerts: sender-address@gmail.com .
Click on " Test " to check that your settings are
correct and that the camera is able to connect
to the email account you entered for sending
the alerts.
9
Recipient, etc. : Use this space to enter the
address(es) which will receive the alerts. In our
example: addressee@gmail.com
IMPORTANT: When you have finished configuration,
do not forget to click on " Save " to save everything
you have entered.
Important note : it does not matter who the email
provider of the addressee or addressees is as it is
the email provider of the sender which dictates what
needs to be entered. However, you must ensure you
check that the alerts are not treated as
spam
by any
of the addressees.
When you have finished configuring your camera, it
will be able to send emails. You must now tell it when
to send them, by clicking "
Motion detection
":