First issue 09 / 03
36
ADJUSTMENT REQUIRED WHEN THE SET IS REPLACED
RGB Assembly
Colour balance adjustment
DIGITAL VIDEO Assembly
1. Adjustment is unnecessary when only the DIGITAL VIDEO Assembly is replaced.
2. When the RGB Assembly is replaced at the same time as this assembly, remove the IC1204 (24LC04(1) SN-TBB) from
the old PC board of the DIGITAL VIDEO Assembly and attach it to the new PC board.
SERVICE PANEL Assembly
1. VSUS Adjustment
All of service panels have a panel identification label (VSUS data, VOFS data). Please just input this V-SUS data on the
label to "V-SUS" on service factory mode.
2. VOFS Adjustment
Please just input the V-OFS data on the label to "V-OFFSET" on service factory mode.
3. Panel white balance adjustment
Y DRIVE Assembly
Panel white balance adjustment
X DRIVE Assembly
Panel white balance adjustment
Other Assembly
(VIDEO SLOT Assembly, SW POWER SUPPLY Module, etc.)
No adjustment required.
DIGITAL VIDEO
Assembly
X DRIVE
Assembly
SLOT TMM SEVICE Assembly
Y DRIVE
Assembly
RGB Assembly
SW POWER SUPPLY
Module
