background image

2

9.Power cord protection

—The power cords must be routed properly to prevent people from stepping on them or

objects from resting on them. Check the cords at the plugs and product.
Power-supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or
against  them.  Pay  particular  attention  to  cords  at  doors,  plugs,  receptacles,  and  the  point  where  they  exit  from  the
product.

10.Attachments

—Do not use attachments not recommended by the manufacturer. Use of improper attachments can

result in accidents.

11.Accessories

—When the product is used on a trolley, care should be taken to avoid quick stops, excessive force,

and  uneven  surfaces  that  may  cause  the  product  and  trolley  to  overturn,  damaging  equipment  or  causing  possible

injury to the operator. Do not place this product on an unstable trolley, stand, pedestal, bracket, or table. The product
may fall, causing serious injury to a child or adult and serious damage to the product. The product should be mounted
according  to  the  manufacturer’s  instructions,  and  use  only  with  a  trolley,  stand,  pedestal,  bracket,  or  table
recommended by the manufacturer.

12.Servicing

—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and

other dangerous conditions. Request a qualified service person to perform servicing.

13.Replacement  parts

—In  case  the  product  needs  replacement  parts,  make  sure  that  the  service  person  uses

replacement  parts  specified  by  the  manufacturer,  or  those  with  the  same  characteristics  and  performance  as  the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

14.Power  source

—This product is intended to be supplied by a listed power  supply,  output  rated  19  V  DC,  4.5A

minimum, indicated on the marking label. If you are not sure of the type of power supply to your home, consult your
product dealer or local power company. For added protection for this product during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.
This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with
another  power  supply  voltage,  the  power  cable  must  be  changed.  Consult  your  product  dealer. The  socket  outlet

should  be  installed  near  the  equipment  and  easily  accessible.  The  power  supply  voltage  rating  of  this  product  AC
adaptor  is  AC100-240V.  The  power  cord  attached  conforms  to  the  following  power  supply  voltage.  Use  only  the
power cord designated by our dealer to ensure safety and EMC. When connecting other products such as VCRs and
personal computers, you should turn off the power of the unit for protection against electric shock. If the AC adapter is
misplaced or needs to be replaced, obtain the same type of adapter from your dealer.

15.Overloading

—Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as

this can result in a risk of fire or electric shock.

16.Entering of objects and liquids

—Never insert an object into the product through vents or openings. High voltage

flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason,
do not spill water or liquid on the product.

17.Damage requiring service

—If any of the following conditions occurs, unplug the power cord from the AC outlet,

and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified
technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable

abnormality in the product indicates that the product needs servicing.

18.Safety checks

—Upon completion of service or repair work, request the service technician to perform safety checks

to ensure that the product is in proper operating condition.

19.Wall or ceiling mounting

—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.
This is a safety feature.

Содержание 15LCDM03B
























Отзывы: