Thomas SAR 460 SA G DIGIT, Руководство по эксплуатации и обслуживанию

Страница: 7 / 42

7
SAR 460 SA G
R = L1
S = L2
T = L3
PE = GND
4.4 - Anchoring the machine
4.2 - Transport and handling of the machine
If the machine has to be shifted in its own packing, use a fork-lift
truck or sling it with straps as illustrated.
4.3 - Minimum requirements for the premises
housing the machine
- Mains voltage and frequency complying with the machine
motor characteristics.
- Environment temperature from -10 °C to +50 °C.
- Relative humidity not over 90%.
- Position the machine on a firm cement floor, maintaining, at
the rear, a minimum distance of 1500 mm from the wall; an-
chor it to the ground as shown in the diagram, using screws
and expansion plugs or tie rods sunk in cement, ensuring that
it is sitting level.
4.5 - Instructions for electrical connection
- The machine is not provided with an electric plug, so the cus-
tomer must fit a suitable one for his own working conditions:
1 - WIRING DIAGRAM FOR 5-WIRE SYSTEM FOR THREE-
PHASE MACHINE - SOCKET FOR A 32A PLUG
4.6 - Disactivating the machine
- If the sawing machine is to be out of use for a long period, it is advisable to
proceed as follows:
1) detach the plug from the electric supply panel
2) loosen blade
3) remove the sawframe return spring
4) empty the coolant liquid tank.