Thomas SAR 460 SA G DIGIT, Руководство по эксплуатации и обслуживанию

Страница: 14 / 42

14
SAR 460 SA G
7.5 - Vice pressure regulation
( OPTION )
- Vice pressure can be adjusted through a special hydraulic
valve.
- Turn the knob ( E ) either increasing or decreasing vice
pressure.
7.4 - Cutting angle adjustment
- Screw the nut ( C ) of the vice. Screw the nuts of the circular
guide as well.
- Keep the circular guide always clean.
7.3 - Vice
- Press the function key to open the vice.
- Lift the stop pawl ( B ), and rest the vice jaw against the
workpiece.
-
Ensure that the pawl ( B ) perfectly catches with the rack
tooth.
- Press the function key to close the vice.
- Keep the rack clean to ensure that the pawl perfectly catch
with the rack.
- Keep the vice guide always clean.
- In case of mitre cutting, unscrew the nut ( C ) swinging the vice
to the required angle. Fix the nut ( C ).
- The sawframe can be swivelled from 0° to 60° to the lefthand.
This way you can have the workpiece cut at a required angle.
- Fully rise the sawframe to the top position.
- Unscrew the nut ( C ) swinging the vice to the required angle.
Uncrew the nuts of the circular guide as well.
- Press the push buttons located on the machine base ( 10 )
swivelling the sawframe to the required angle.
B
C
E
7.6 - Blade cleaning brush
The brush removes the chips off the blade during the cutting
cycle. Periodically check its wearing degree, eventually adjust
or replace the metal brush.
10
LEFT RIGHT