• Never repair damage to the appliance, to the
accessories or to the cable (special cable required);
have repairs done only by an authorised customer
service station, because modifications to the
appliance can pose a risk to your health. Ensure that
only original spare parts and accessories are used.
• Do not expose the appliance to the elements,
humidity or heating sources.
• Never aim the cleaning jet at people or animals, at
electrical sockets or electrical appliances.
• After wet vacuuming, empty the collecting bin
immediately.
• Chemicals such as the cleaning fluid concentrates
should not be handled by children.
• The functionality and complete effectiveness of the
appliance can only be warranted if you use original
THOMAS cleaning fluids.
• Persons with sensitive skins should avoid direct contact
with the cleaning fluid.
• If cleaning fluid comes into contact with mucous
membranes (eyes, mouth, etc.), immediately flush with
water.
We care about the environment
Do not simply throw out packing materials and old
appliances!
Packing materials:
Take the packing carton to paper recycling collection
points.
Take the polyethylene (PE) plastic bag to collection
points to be reused.
Disposal of appliance after end of service
life:
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of electrical and elec-
tronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Assembly of castor wheels
A
Undo the snap-on fasteners and lift the motor
block.
B
Turn collecting bin upside down, so that the
opening is facing downwards. First insert the
castor wheels into the holes marked with the
number 4, then press in until they snap into place.
Dry vacuuming
Never use your AQUAFILTER appliance in
dry vacuum mode without the Aquafilter, the
waterfilter cartridge and an appropriate water
level.
Do not vacuum up large quantities of particle
dust, e.g. flour, cocoa powder, cement, etc.
H
Remove the cleaning fluid tank.
D
Connect up the three-piece AQUA filter, pushing
it together until the two parts fit snugly, and push
it firmly onto the suction socket until the wall of
the bin.
Note the marker
guides!
Fill 2 litres of clear water into the collecting bin.
C
Fit the waterfiltercartridge (35) and slide on to its
fullest exent. Secure with the turning clips.
E
Clip the suction hose for cleaning fluid to the
underside of the motor block.
F
Place the motor block onto the collecting bin and
snap shut with snap-on fasteners.
G
Connect flexible hose. Remove the hose by
turning the hose connecting piece to the side and
withdrawing the hose.
Assemble the desired accessories.
Connect the mains cable.
K
Switch on the appliance with the On/Off (6)
switch.
The pump switch (7) must not light up.
Suction control (11, figure M) allows you to vary
the suction power.
– Sliding air trap closed = full suction power
– Sliding air trap open = reduced suction power
12
