thomann The t.mix 16.4, Руководство пользователя

Страница: 16 / 28

6 Operating
6.1 Main menu
Important settings are directly accessible in the main menu.
1.
Press [Menu] .
2.
Use the [Parameter] control to select, to set values, and to navigate the menu.
Pressing the control opens a menu item or confirms a setting.
The table below provides a overview of the available menus.
Menu item Meaning
‘System’ Shows information about the revision status of the hardware and software and makes it pos-
sible to reset the device to its delivery state.
‘Assign’ Assigns input channels and FX to the possible buses.
‘Sends’ Selects the signal path for MAIN.
‘Delay’ Opens the settings for the delay time which can be set per channel.
‘Invert’ Opens the settings for the inversion of the phase length which can be set per channel.
‘Gate/EXP’ Opens the settings for the noise gate which can be switched on per channel.
‘COMP’ Opens the settings for the compressor which can be switched on per channel.
‘Channel’ Opens the settings for the input channels.
‘HPF’ Opens the settings for the high pass filter which can be switched on per channel.
‘LPF’ Opens the settings for the low pass filter which can be switched on per channel.
‘GEQ’ Opens the settings for the graphic equalizer.
‘FX’ Enables the selection of an effect.
‘Digi.IN’ No function.
‘Digi.OUT’ No function.
‘AutoMix’ Switches the automix function on or off.
‘Ducker’ Switches the ducker function for the automatic volume cut in one channel on or off.
‘FBC’ Switches the feedback killer function on or off.
‘Save’ Makes it possible to save the presets.
‘Load’ Makes it possible to load the presets.
‘Default’ Makes it possible to reset the device to the delivery state.
Operating
Mixer
16