thomann The t.mix 16.4, Руководство пользователя, Страница: 15 / 28

34 [ETHERNET]
RJ45 socket for integrating the device into a local network (LAN) or for firmware updates.
35 [CH11] … [CH16]
Inputs for signals with line levels, designed as as 1/4" phone sockets (stereo, balanced). If a mono signal is fed in,
use the channel marked [LEFT] . These inputs are typically used for signals from effects pedals.
36 [CH1] … [CH10]
Inputs for microphone levels, designed as XLR sockets.
37 [CH1] … [CH10]
Inputs for signals with line levels, designed as as 1/4" phone sockets (mono, balanced).
38 [AUX Send 1] , [AUX Send 2]
AUX outputs 1 and 2, designed as as 1/4" phone sockets (mono, balanced)
39 [Ctrl Out Left] , [Ctrl Out Right]
Control room output, designed with separate 1/4" phone sockets (balanced) for the left and right channel.
40 [Main Out Left] , [Main Out Right]
Master output for connecting an amplifier or an active speaker box, designed with separate 1/4" phone sockets
(balanced) for the left and right channel, designed as XLR chassis sockets.
41 [Input]
IEC chassis plug for operating voltage supply with fuse holder.
Should the fuse have blown, disconnect the unit from the power supply and replace the fuse with a new fuse of
the same type.
42 [Power]
Main switch. Turns the device on and off
Rear panel
Connections and controls
16.4
15