User Manual
Please read this user manual carefully and follow the instructions to
avoid danger or damage to the unit due to mishandling.
A.
Thank you for purchasing our effect lighting. We guarantee your
satisfaction in having acquired this lighting product.
B. Handling
instruction.
!
Before your initial start-up, please unpack and carefully check for
damage caused during transportation.
!
Open the service lid and install the lamp/lamps. Be careful not to
touch the bulbs bare-handed and do not install the lamp with the
power cord plugged in.
!
Locate a suitable spot for your device where there is good air flow.
!
Check the surroundings and make sure there is no flammable
materials close to the unit as it can become very hot.
C. Cautions.
!
The machine should be kept away from moisture.
!
It is normal to find smoke or an odor caused by the paint around the
bulb during initial use.
!
Always use the same type of spare parts (bulbs, fuses, etc.). When
replacing parts, please use only genuine spare parts.
!
Be sure the service lid is tightly closed during operation.
!
Consistent breaks during operation are essential to maximize the life
of this device as it is not designed for continual use.
!
Do not connect the device to any dimmer pack.
D. Warnings.
!
Always remember to unplug the unit from the power mains before
any service is done. There are no user serviceable parts inside.
Service should be done by qualified personnel only.
!
Do not touch any wires during operation.
!
Do not touch the housing bare-handed during operation, and do not
use the device in the presence of persons suffering from
epilepsy.
