thomann Stairville novaSpot 250, Руководство пользователя

Страница: 71 / 80

5. The individual gobos are secured by clamping springs in their gobo wheel. In gobo
wheel 1, these clamping springs are located on the front side, in the gobo wheel 2 on
the back. Carefully lever out the clamping spring of the gobo to be exchanged and
remove the gobo from the gobo wheel.
By no means loosen the screws on the gobo wheel! This would open the ball
bearings.
6.
Insert the new gobo carefully into the free opening of the gobo wheel and attach the
clamp spring back to its original position.
7.
Insert the gobo module back into the unit. Make sure that the D-Sub connector slides
straight into its counterpart on the motherboard. Secure the gobo with the two associ‐
ated cross-head screws.
8.
Remount the upper housing part and attach it using the three associated cross-head
screws.
9. Reconnect the device to the power grid.
Service
novaSpot 250
71