thomann STAIRVILLE DMX-Master I, Руководство пользователя

Страница: 47 / 68

1.
Enabling programming mode.
2.
Press [FINE] and [MODE] simultaneously. The [REVERSE] LED lights up and indicates that
the device is in reverse mode.
3.
Use [BANK UP/DOWN] to toggle between Pan and Tilt.
4.
Press [TAP/DISPLAY] to toggle between 8-channel and 16-channel mode.
5.
Select the desired scanner with one of the [SCANNERS] buttons.
6.
If necessary, you can use [PAGE SELECT] to toggle between the two levels, Page A and
Page B.
7.
While holding down [MODE] , press the [SCENES] button. All LEDs should flash briefly and
thus indicating that the DMX channel has been reversed. The [SCENES] button 1 stands
for DMX channel 1, [SCENES] button 2 for DMX channel 2 and so on.
8.
Repeat steps 3 - 7.
8-channel mode: You can assign the PAN / TILT movement for 24 scanners. In 8-channel
mode, you can save PAN / TILT for page A and page B.
16-channel mode: You can assign the PAN / TILT movement for 12 scanners. In 16-
channel mode, you can save PAN / TILT only for page A or page B.
Reversing channels
Operating
DMX-Master I, DMX-Master MK II ENC
47