thomann STAIRVILLE DMX-Master I, Руководство пользователя

Страница: 35 / 68

8.3 Programming scenes
1.
Enabling programming mode.
2.
Press one of the [SCANNERS] buttons to turn on fader control for the corresponding
scanner. The lighting LED indicates this. You can select several scanners at the same time
by pressing their [SCANNERS] buttons. So you can set several scanners at once.
3.
If using a dimmer, use the faders to set the desired dimmer intensity. With the DMX
Master MK-II ENC, you can also use the two encoder wheels to control the Pan or Tilt
movements of the scanners.
4.
If desired, use [PAGE SELECT] to move to the second level to programme channels 9-16.
5.
Once you have made all the settings, press [MIDI/REC] to save the scene.
6.
Use the [BANK UP/DOWN] buttons to select the bank where you want to save your scene.
30 banks with each eight memory locations are available.
7.
To save the scene to the desired location, press the corresponding [SCENES] button (1-8).
All LEDs and the display will flash three times, indicating that the scene has been saved.
Then the display shows Bank and Scene.
8.
Repeat steps 3 - 7 until all desired scenes have been saved. Press the [SCANNERS] button
again to turn off its fader control. To set another scanner, press the corresponding
[SCANNERS] button to turn on its fader control. Then you can begin programming again.
Operating
DMX-Master I, DMX-Master MK II ENC
35