Mounting pads on the rack
1.
Slide the plastic ends of the mounting brackets (22) up to the stop into the designated clamps on the rack. Then tighten the
wing nuts on the clamps by hand.
2.
Attach pads (14, 15) to the mounting brackets (22) and hand-tighten the wing nuts of the pads.
3.
Align the pads on the rack to meet your needs, then tighten the wing nuts of the brackets and the wing nuts of the pads
evenly.
Mounting cymbals on the rack
1.
Unscrew the wing nuts from the cymbal holders (10) and take the felt washers off the holders.
2.
Place the cymbals (13) as shown in the figure on the holders. Be sure to attach the crash pad (10 inch) to the left holder and
the ride pad (12 inch) to the right cymbal holder.
3.
Place the felt washers on the cymbals (13) and fix the cymbals with the associated wing nuts on the holders.
Assembly
e-drum set
10
Содержание Millenium MPS-450
Страница 1: ...MPS 450 e drum set assembly instructions...
Страница 14: ...Notes e drum set 14...
Страница 15: ......
Страница 16: ...Musikhaus Thomann Hans Thomann Stra e 1 96138 Burgebrach Germany www thomann de...