thomann HITMAN HD-30 Marauder, Руководство пользователя

Страница: 23 / 60

5.
Use or to select one of the basic settings for the pad:
‘PITCH’ Pitch setting
‘PITCH FINE
TUNE’
Pitch fine adjustment
‘VELOCITY TO
PITCH’
‘on’ / ‘off’
Activates or deactivates the control of the pitch by the touch
velocity. Is only available when ‘PITCH’ and ‘PITCH FINE
TUNE’ are not used.
6. Use [+] or [–] or the jog wheel to select the desired parameter and confirm with
[ENTER] .
7. Press [ENTER] to store the selection.
1. Press [F4] ( ‘FILTER/ENV’ ) to display the current filter settings.
2.
Use or to select one of the settings:
‘FILTER CUTOFF’ Controls the cut-off frequency for the low-pass filter
‘FILTER
RESONANCE’
Controls filter resonance to create an emphasis effect
‘VELOCITY TO
CUTOFF’
‘on’ / ‘off’
Activates or deactivates the control of the cut-off fre‐
quency by the touch velocity
‘VELOCITY TO
RESONANCE’
‘on’ / ‘off’
Activates or deactivates the control of the filter resonance
by the touch velocity
1. Press [F4] ( ‘FILTER/ENV’ ) and [F1] ( ‘ENVELOPE’ ) to display the current envelope
settings.
2.
Use or to select one of the settings ‘ATTACK’ , ‘DECAY’ or ‘VELOCITY TO
DECAY’ and confirm with [ENTER] .
Use [+] or [–] or the jog wheel to select the desired parameter and confirm with
[ENTER] .
After setting all the desired parameters, you can save your settings.
1.
Go to the ‘DRUM’ start page and press [ENTER] .
ð
The available memory locations are displayed.
2.
Use [+] or [–] to select a memory location and confirm with [ENTER] .
3.
Enter a name for your sound. Use the jog wheel to select the letter. With or
you can move the cursor position to the right or left.
Filter editing
Envelope editing
Storing drum settings
Operating
HD-30 Marauder
23