thomann Fun generation PicoSpot 45, Руководство пользователя

Страница: 33 / 68

The display shows ‘ChS’ . Press [ENTER] , then use [UP] and [DOWN] to select the number of DMX
channels to be used by the device. Control via 5, 9 or 11 channels is available.
When the display shows the desired value, press
[ENTER] to confirm the setting and then
[DOWN] to proceed to the next menu item. To change the menu item without making any
changes, press [MODE] .
The display shows ‘brk’ . Press [ENTER] , then use [UP] and [DOWN] to select a certain behaviour
for the device in case of interrupted DMX connection. Choose ‘Hold’ if you want the device in
that case to maintain the state that corresponds to the last received DMX signal. Choose ‘Hold’
if you want the device in that case to perform an automatic run. Choose ‘Sound’ if you want
the device in that case to perform a sound-controlled automatic run. Choose ‘Sound’ if you
want the device in that case to return to its home position.
When the display shows the desired value, press
[ENTER] to confirm the setting and then
[DOWN] to proceed to the next menu item. To change the menu item without making any
changes, press [MODE] .
Selecting the number of DMX
channels
DMX break
Operating
PicoSpot 45
33