7.1.3 Operating mode ‘Slave’
In this mode, the device follows exactly the operation of the master that it is connected to. This
setting is only relevant if the device is not controlled via DMX.
1.
Press
[MODE]
to activate the main menu.
2.
Press repeatedly
[MODE]
and select the menu item
‘Slave’
.
3.
Confirm the selection with
[SET]
and use
[UP]
or
[DOWN]
to choose between
‘Yes’
(Slave
mode on) and
‘No’
(Slave mode off).
4.
To exit the menu item without making changes, press
[MODE]
.
7.1.4 Operating mode ‘Automatic’
In automatic mode, all programmed shows are played sequentially in an endless loop.
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Operating
Outdoor Stage PAR WLA TR1
33
Содержание 515365
