6-2
CKRF
6. Storage and Transportation
6.
Storage and Transportation
6-2
Precautions to be observed for prevention of product fault or fracture
z
Since using an adverse storage environment may cause fault, store the product in the
environment described below:
· Place at ambient temperature within the following storage temperature range
Storage temperature: 0°C to 50°C
(Ambient humidity 80% RH or less, no freezing or condensation)
* With the product unpacked
· A place with non-corrosive gas nor flammable gas
· A place with little dust, salt or metallic powder
· A place with no exposure to water, oil or chemicals
· A Place where a vibration or shock does not transmit to the main unit
z
This product is provided with antirust treatment and sealed before being packed.
When storing the product, enclose it in a package designated by THK and store it in
a horizontal orientation while avoiding high temperature, low temperature and high
humidity.
z
When you remove the suction port, be sure to turn off the power supply and stop the
supply voltage first, and check that fluid in the piping has come out.
z
After mounting, wiring, and pipework, pass fluid or connect power supply, and perform
an appropriate function test and leak test. If you find any leaks or the devices not
functioning properly, do not use the product and make sure that the parts are mounted
correctly.
It may lose the cleaning performance.
z
Do not apply an excessive load on the package, otherwise, it may cause fault or fracture.
www.thk.ru
тел. +7(499) 703-39-86