Thitronik WiPro, Руководство по установке

Страница: 127 / 292

1. Handling the system
Please read the following instructions carefully
to avoid faulty operation.
1.1 Controlling the system with the remote key fob
The “lock” button arms the system.
Only possible with the vehicle doors closed
To arm the system on Ford Transits, briefly press
the button twice in succession.
The vehicle indicators flash twice (depending on the vehicle type),
the interior beeper sounds once and the status LED starts to flash.
If the interior beeper makes a series of beeps
when locking the vehicle, one or more wireless contacts
are open but the system still arms itself
(see 1.4 ventilation function).
The “unlock” button disarms the system.
The vehicle indicators flash twice (depending on the vehicle type),
the interior beeper sounds once and the status LED stops flashing.
1.2 Controlling the system with the handheld transmitter
Any button arms the system.
The vehicle indicators flash once, the interior beeper sounds once and the
status LED starts to flash.
Feedback via vehicle indicators on vehicles without CAN bus only.
Any button disarms the system.
The vehicle indicators flash twice, the interior beeper sounds twice and the
status LED stops flashing.
1.3 Activating the panic alarm
If you feel threatened while you are in the vehicle, use the panic alarm function
to draw attention. With a panic alarm, the siren, indicators and horn are activated
depending on the type of vehicle.
If a GSM module is fitted, an emergency SMS is sent to all call numbers.
If a GPS receiver is fitted, your position is also transmitted.
A panic alarm can be activated with the system armed or disarmed.
The panic alarm is activated by pressing both buttons on the handheld
transmitter simultaneously.
The panic alarm is deactivated by pressing any button on the handheld transmitter.
WiPro „all in one“ Operating Instructions Page 1
!
!







GB