Thinkware iNAVI BLACK Clair2, Руководство пользователя

Страница: 47 / 68

www.inavi.com
I
47
Chapter 03 I Menu
Black Box Setting > Parking Mode - 3
PC Viewer
Notes for Setting Parking Mode (based on 12V of
vehicle battery)
When it takes too much time to change the mode to
Auto Parking mode while driving, or while parking, raise
the voltage for changing to Parking mode.
Setting the range of voltage and time for ending
the recording (based on 12V of vehicle battery)
When recording time becomes too short after changing
the mode to Auto Parking mode, lower the voltage for
ending the recording. (However, if the range of voltage
for ending the recording is set to the too low value, the
vehicle battery may be discharged so please be careful.)
When the voltage is lower than the setting value of volt-
age for ending the recording while setting the recording
ending time, the function to set the voltage for ending
the recording starts first.
Functions of auto parking mode and blocking
voltage for ending recording end are available
when our retail continuous power cable is used.
If the product malfunctions even when you
changed the setting values, please check the
terminal and the vehicle battery and if required,
charge the battery.
Set the auto parking mode switch level and the
ending recording level according to the battery
status and usage time before using it.
To adjust the setting values to appropriate
values, change the values by one level for
avoiding malfunctions.
The product may be malfunctioned when you
use other cables but our retail continuous
power cable.
Range of voltage for parking mode:
Min. 12.4V ~ Max. 13.1V
Changing the mode
to Parking mode
while driving
When it takes too much time
to change the mode to Auto
Parking mode while driving
Range of voltage for ending recording
Min. 11.7V ~ Max. 12.4V
Too long parking
recording time
(the vehicle battery
may be discharged)
Too short parking
recording time
(the vehicle battery
discharge will be
prevented)