ThinkPad E550, Руководство пользователя

Страница: 114 / 172

Solution : Gently clean the surface of the reader with a dry, soft, lint-free cloth.
• Problem : The reader often fails to enroll or authenticate your fingerprint.
Solution : If the surface of the reader is dirty, stained, or wet, gently clean the surface of the reader
with a dry, soft, lint-free cloth.
For tips on how to maintain the fingerprint reader, refer to Maintaining the fingerprint reader.
Battery and power problems
This topic contains instructions on troubleshooting battery and power problems.
Battery problems
• Problem : The battery cannot be fully charged in the standard charge time when the computer is powered
off.
Solution : The battery might be over-discharged. Do the following:
1. Turn off the computer.
2. Connect the ac power adapter to the computer and let it charge.
If a quick charger is available, use it to charge the over-discharged battery.
If the battery cannot be fully charged in 24 hours, use a new battery.
• Problem : Your computer shuts down before the battery-status icon in the Windows notification area
shows empty, or your computer operates after the battery-status icon in the Windows notification area
shows empty.
Solution : Discharge and recharge the battery.
• Problem : The operating time for a fully charged battery is short.
Solution : Discharge and recharge the battery. If your battery operating time is still short, use a new battery.
• Problem : The computer does not operate with a fully charged battery.
Solution : The surge protector in the battery might be active. Turn off the computer for one minute to reset
the protector; then turn on the computer again.
• Problem : The battery cannot be charged.
Solution : You cannot charge the battery when it is too hot. If the battery feels hot, remove it from the
computer and allow it to cool to room temperature. After it cools, reinstall it and recharge the battery. If it
still cannot be charged, have it serviced.
An ac power adapter problem
Problem : The ac power adapter is connected to the computer and the working electrical outlet, but the
power adapter (power plug) icon is not displayed in the Windows notification area.
Solution : Do the following:
1. Make sure that the connection of the ac power adapter is correct. For instructions on connecting the ac
power adapter, see Safety, Warranty, and Setup Guide that comes with your computer.
2. If the connection of the ac power adapter is correct, turn off the computer, then disconnect the ac power
adapter and remove the main battery.
3. Reinstall the battery and reconnect the ac power adapter, then turn on the computer.
98
User Guide