this is located in your computer tray
and for Mac’s this is located under Applications). Then follow all on
screen instructions.
7
6
Quick setup
Follow these simple instructions to get on your way to savings!
NOTE: DO NOT PLUG IN THE USB RECEIVER OR MODLET BEFORE
COMPLETING THE SOFTWARE WIZARD. The wizard will prompt you
when to plug them in.
1. Software
2. Hardware
Plug your USB receiver into your com-
puter when prompted by the Installer.
Depending on your computer, you
may see some ‘found new hardware’
or ‘install new hardware’ prompts. If
so, be sure to accept all of them. If
the USB receiver is not found on your
first try, reinsert into the USB slot and
push it in all the way
Turn off and unplug the window A/C
closest to your computer that you want
to monitor. Click
Search on the Install-
er first, then plug the modlet into the
outlet. The spinning LED light will stop
when your modlet joins the network.
Plug your A/C back into the modlet and
complete the set up on the Installer.
Go to
www.mymodlet.com to create an account and begin the
installation. Enter the registration key found on the inside cover of the
modlet box. Create a user profile and then download and save the
installer to your desktop. Double click on the installer icon to begin
the wizard and follow the onscreen instructions. If required to reboot
during the process, click back on the ThinkEco Installer to continue
the installation.
Next, set up the smartAC thermo-
stat. First, click the
Add thermostat
on the install wizard and the select
the modlet you wish to pair with the
thermostat. If you have exited the
wizard, it can be opened through the
ThinkEco
Modlet Manager (for PC’s
