Think Appliances VEF90EG, Руководство пользователя

Страница: 5 / 24

2. The appliance requires connection to a 240 V,50 Hz electric supply. The power point
must be installed by an authorized person.
3. Before commencing any work, make sure that the power point switches ore turned off
and the three in plug is removed
4. If the appliance cannot be adjusted to perform correctly contact your local gas utility.
5. Instruct the user in the operation of the appliance before leaving.
Vertical clearances:
The cooker shall be installed so that a vertical clearance of at least 600 mm is maintained
between its burners and any combustible material, and where this is not practicable, the
underside of an combustible material less than 600 mm above the burner shall be
protected by noncombustible millboard at least 6 mm thick which is covered with sheet
metal not less than 0.4 mm thick, or shall be protected by an equivalent material,
extending at least 225 mm beyond the sides of the cooker.
Overhead clearances:
Range hoods and exhaust fans shall be installed in accordance with the manufacturer's
instructions. However, in no case shall the clearance between the top of the highest burner
of the cooking appliance and the underside of a range hood be less
than 600mm,
or an
overhead exhaust fan,
750 mm
Side clearances
to vertical surface:
If the distance measured from the periphery of the nearest burner to any vertical
combustible surface, is less than 200 mm, the surface shall be protected in accordance
with clause 5.12.1.1 and 5.12.1.2 of A5 5601.
Installation
Make sure the minimum clearances to combustible materials are maintained during the
installation including adequate space for the operation and servicing of the cooker. For
height limitations use the dimensions as shown in the drawing.
Overall dimensions (with legs adiusted to 180mm).