Sargas Specifications
Sargas User Guide
54
Sargas Specifications
The following are the specifications for the Sargas Reader.
UHF RFID Antenna Interface
Interface
: Two RP-SMA Connectors
RF Power Output
: Separate read and write levels, adjustable from 0 dBm to 30.0 dBm*
(1.0 W)
Frequency
: Hop table with up to 62 entries, configurable in 50KHz steps, accommodating
the following ranges (hardware dependant):
– 902-928 MHz (FCC; NA, SA)
– 865.6-867.6 MHz (ETSI; EU)
– 865-867 MHz (MCIT; India)
Power
External DC Power
: 5 VDC +/- 0.25V supply voltage. Maximum DC power: 15 W
Note
If a third-party DC Power supply is used it must meet the following criteria:
- Be UL Listed
- Meet the above operating specs
- The output must comply with SELV and LPS characteristics
- Have a maximum operating ambient temperature that meets or exceeds the
intended Sargas operating temperatures as covered under the UL Listing of the
power supply.
Environmental
Operating Temperature
: -40°C to +60°C
Note
If an external DC power supply with a lower operating ambient temperature, as
covered under the UL Listing of the power supply, is used then the operating
ambient temperature of the Sargas would be reduced accordingly.
Storage Temperature
: -40°C to +85°C
Содержание Sargas
Страница 1: ...1 Sargas User Guide For firmware version 5 1 2 and later 109561 RevE...
Страница 18: ...Setting Up the Reader Sargas User Guide 18 Figure 3 Local Area Connection Status Window...
Страница 62: ...Appendix B Sargas Dimensions Sargas User Guide 62 Appendix B Sargas Dimensions Figure 11 Sargas Dimension...
