Using GPIO
Sargas User Guide
32
Using GPIO
The Sargas Reader includes an 8-pin terminal block connector for GPIO access
GPIO Connector on the reader:
On Shore OSTOQ08B151 or
Phoenix 1881503
Mating Connector
On Shore OSTHW08B050 or
Phoenix 1881383
This connector is used to support two opto-isolated general purpose inputs and two opto-
isolated general purpose outputs. The values of the GPIO lines can be Get and Set using
the MercuryAPI. See the respective guide for more details on software control of these
signals.
Connector Pinout
From left to right:
Electrical Specifications
The electrical specifications are as follows:
Pin
I/O Name
I/O Function
1
+5V Supply Reader supplied (not isolated) power source
2
V-GPO
Power input for isolated outputs
3
User OUT 1 Isolated output 1 (active pull down to V-)
4
User OUT 0 Isolated output 0 (active pull down to V-)
5
User IN 1
Isolated input 1
6
User IN 0
Isolated input 0
7
ISO-GND
Return for isolated inputs and outputs
8
COM-GND Reader (not isolated) return
Содержание Sargas
Страница 1: ...1 Sargas User Guide For firmware version 5 1 2 and later 109561 RevE...
Страница 18: ...Setting Up the Reader Sargas User Guide 18 Figure 3 Local Area Connection Status Window...
Страница 62: ...Appendix B Sargas Dimensions Sargas User Guide 62 Appendix B Sargas Dimensions Figure 11 Sargas Dimension...
