4.3811.00.000_US-Anemometer-DSP_eng.doc
19 - 26
021511/10/06
0 -> reserved
10 -> 1200 7E1
1 -> reserved
11 -> 1200 7E1
2 -> 1200 8N1
12 -> 4800 7E1
3 -> 2400 8N1
13 -> 9600 7E1
4 -> 4800 8N1
14 -> 19200 7E1
5 -> 9600 8N1
15 -> 38400 7E1
6 -> 19200 8N1
16 -> 57600 7E1
7 -> 38400 8N1
17 ->115200 7E1
8 -> 57600 8N1
9 ->115200 8N1
8
Configuration of Ultrasonic Anemometer by Customer
The Ultrasonic Anemometer 2D is factory-set prior to delivery to the customer.
Setting is described in the supplementary sheet
"Factory Setting"
.
It is possible for the customer to alter the factory setting of the Ultrasonic Anemometer 2D or to
adapt it to new requirements. Here it should be borne in mind that with a change in settings, the
order number allocated at the factory can then no longer help with identification.
These Operating Instructions relate to the device version 4.3811.00.000.
For the adjustment of settings we recommend you consult the
General Operating Instructions
for
THIES ULTRASONIC. This describes all available settings.
Recommendation:
After performing configuration please amend the supplementary sheet "Factory Setting" and send
in to the manufacturer in the event of maintenance or repair.
