THIEMAN MDC LB, Руководство по установке

Страница: 10 / 16

10.
Step 12
Check all operations and trim excess where required for stow clearances. The M
series liftgate comes with a standard snubber kit to prevent excessive wear during
transport. See figure 15 for mounting instructions.
Step 13
To re-adjust the platforms spring assist, follow these steps: (See figure 16.)
1. Fold the platform for stowing and raise until the tension is relieved from spring
item C.
2. Remove snap ring item A from the groove and slide it to the left.
3. Remove the locknut item G from item E.
4. Slide spring support tube item B to the left and tilt right side up and remove from
assembly.
5. Remove long straight end of closing spring from hole in center rib of platform item
D. Moving the spring to the left decreases the tension and to the right increases
the tension.
6. Return spring support tube to position and replace snap ring.