Thiele 00900383, Руководство пользователя

Страница: 22 / 92

15
R
eliant
3700 M
anual
Stack height affects the downward pressure on
the feed belts. Greater downward pressure can
increase the chances for misfeeds or double
feeds.
3
How to Operate
Sequence of
Operation
Successful power-up and operation is assured if you apply the follow -
ing sequence of steps:
1: Loading product in the hopper
2: Determining stack height
3: Powering On feeder
4: Setting/adjusting speed
5: Running test cycles
6: Final check
STEP 1:
Loading Product
in the Hopper
Preshingling prevents multiple sheets from
jamming under the gate assembly at startup.
1. Preshingle by hand a small stack of product so that it con -
forms to the curvature of the gate assembly. Push in gently
to make sure lead edges touch the gate bracket assembly and
front edges of the hopper guides.
2. At the back wedge, notice how it helps lift the trailing edges
of the product off the table top and feed belts. Also notice
how the lifting helps to push the preshingled edges against the
curvature of the gate assembly.
Leading Edges Against Gate Bracket Assembly and Side Guides
Preshingle the product
Place this end
against gate
assembly
Trailing
edges lifted
Edges should be against
curveature of gate