Thiel SI 1, Руководство пользователя

Страница: 8 / 16

Setup and
Adjustment Flow Chart
8
Crossover not required
Do main
speakers produce bass deep
enough
an
d
play loudly
enough?
Connect processor
’s
subwoofer output to
subwoofer LFE input
Is poor sonic
match of subwoofer
acceptable?
T
ell processor main
speakers are “small”
T
ell processor main
speakers are “large”
Crossover decision
Processor Setup
Y
Y
N
Does your
system have a multi-channel
processor with a subwoofer
output?
Y
N
N
Hookup
Is a passive
crossover available for your
model of
THIEL
main
speakers?
Use Integrator
Use passive crossover
If you have a processor
tell it main speakers are “large”
Do main
speakers play loudly
enough?
Is correct, fixed
main channel bass
level acceptable?
Y
N
Y
Y
N
N
If you have one, connect
processor's LFE output
to subwoofer LFE input
Y
ou can always take the “No” path but you
ma
y
take the “Y
es” path
if the answer is yes.
Subwoofer will be
used only for
reproduction of
Special ef
fects
channel.
Subwoofer will be
used to reproduce all
low frequency signals
in all channels but
balance and integration
will not be good.
Subwoofer will be
used for ef
fects channel
and enhancing bass of
main channels with very good
blending.
Subwoofer will be
used for ef
fects channel
an
d
main channel bass.
Can provide enhancement
or
transfer of bass from main channels with
excellent blending and
flexible adjustment.
Set subwoofer channel to "On" or "Yes". Set subwoofer level to same as left/right channels
If you have one, connect
processor's LFE output
to Integrator's LFE input
T
est the polarity of your amplifier and speakers by
connecting the Integrator's left/right outputs to your main
speaker amplifier inputs, set the Integrator to
Augment
mode and push the Spkr Pol
T
est button on the rear
of the Integrator
. If your woofers move inward reverse
the + and – wires connected to each speaker
.