Thiel SI 1, Руководство пользователя

Страница: 13 / 16

Remote Control Command Codes
13
This information is provided for developers of automated systems. It is not relevant to most users.
Function Allowed RS-232 code * RC5 code (Dec)
values (## = values) Command **
Next SS00NT 10
Previous SS00PV 11
Increase SS00IC 12
Decrease SS00DC 13
Store# 0-6 ‡ SS##SO 14+#
Recall# 0-6 ‡ SS##RL 21+#
Augment SS00AG 28
Crossover SS00XO 29
Mono SS00MN 30
Stereo SS00SE 31
#subs 1-16 SS##NU 31+#
Amp gain 20-40 SS##AN 48 §
Sealed SS00SD 49
Reflex SS00RX 50
LF limit 20-90 SS##LT 51 §
Sens 83-95 SS##SN 52 §
Damping 5-9 † SS##DM 48+#
LF ext 15-40 SS##ET 58 §
LF level 0-12 †† SS##LL 59 §
XO Freq 40-99 SS##XF 60 §
LFE level 0-10 SS##LE 61 §
Digit 0-9 0-9
* RS-232 port protocols are: 38,400 Baud, 8 data bits, 1 stop bit, no parity.
‡ Values of 1 to 6 execute a direct store or recall to that memory.
A value of 0 initiates the command. For completion, increase or decrease
commands select which memory, and a second store or recall completes the command.
† Multiply desired setting by 10. Example: setting of 0.7 = value of 7.
†† Add 6 to the desired LF setting. Example: setting of zero = value of 6.
§ These commands must be followed by two digit commands or the sequence is aborted.
** RC5 system value depends on DIP switch settings:
Switch settings System DIP switch settings must be the same in the Integrator and the Remote control un
on-on-on-on 7 The DIP switches are accessed by removing the top cover of each unit.
on-on-on-off 11
on-on-off-on 14
on-on-off-off 15
on-off-on-on 17
on-off-on-off 18
on-off-off-on 19 The RC5 code is a 14 bit word that is built with
on-off-off-off 20 a start bit of “1”, a second bit of “0”,
off-on-on-on 21 a toggle bit that changes with each new key press,
off-on-on-off 22 5 “system” bits and then 6 “command” bits.
off-on-off-on 23 In decimal notation, this is 16,384, plus 64 times
off-on-off-off 24 the system value, plus the command value,
off-off-on-on 25 with 4096 added to each alternate key press.
off-off-on-off 26
off-off-off-on 27
off-off-off-off 28
EXAMPLES
System*
Function RS-232 code
1
st
2
nd
3
rd
1
st
2
nd
3
rd
Recall preset 4 SS04RL 25 25 4659 – –
Set XO Freq to 65 SS65XF 25 60 6 5 467C 4646 4645
Set LF Level to +3 SS09LL 25 59 0 9 467B 4640 4649
* If DIP switches set to off-off-on-on. ** Assuming toggle bit = 0.
RC5 word (hex)**
Command
RC5 code (Dec)