Tecma Compass High ECO Owner’s & Installation Manual
18
www.thetfordmarine.com
Installation
+
Red wire
■
Fresh Water Installations - refer to the Solenoid Harness and Accessory Kit instructions
■
Raw Water Installations - refer to the Pump Harness and Accessory Kit instructions
Attach Water Supply
Slide K3 through K4 ; connect to
K5
; cover hole and secure
K4 with screws.
-
Black wire
Note:
Refer to Fig, C, D and E for all part references.
F
NP
J
1.
Mark / cut wall 1.75” - 2” wall hole.
2. Place
K4
over hole; drill screw holes.
12’ - plan accordingly!
Position connectors; feed K3 through wall.
Black
Blue/white
K3
Connect
K3
to
F
.
K3
F
Connect
F
to
NP
connector; then to
J
Place
1
in permanent position; trace outline.
AR
T00212-1
1
1
2
3
4
5
6
7
1.75”- 2.0”
.0445 m - .0508 m
K4
Materials Not Provided
NP
■
In-line Strainer (if applicable)
■
3/4” - diameter water supply line (Raw Water installation)
■
3/4”- diameter minimum Vented Loop – if required (Raw Water installation)
■
1/2” - diameter water supply line (Fresh Water installation)
■
1-1/2”- diameter minimum Vented Loop – if required
■
1-1/2”- diameter Marine Discharge Hose
■
1-1/2”- straight or 90
O
coupling (as needed)
■
Silicone caulk (white or clear)
■
Various Electrical Connectors
